Wide opening for easier filling and cleaner use
The Wide Mouth Tub is made for products that need a broad opening rather than a narrow neck. That shape helps on filling lines, at bench packing stations and in stores where staff need quick access with scoops, measuring cups or filling nozzles. The wider top also makes it easier to level product neatly before the lid goes on, which matters when the contents are thick, textured or slightly sticky.
We supply tubs in injection-moulded polypropylene and HDPE options, depending on the product, the required stiffness and the packing line setup. Both materials are commonly used in local packaging because they hold shape well, stack neatly and work across food, pharmaceutical and cosmetic packing. The finish can be plain or matched to a requested colour, with clear or coloured lids where the application calls for it.
- Wide mouth profile for faster access
- Injection-moulded body for consistent wall thickness
- Suitable for manual and semi-automatic filling lines
- Stackable for warehouse handling and transport
Sizes and formats packers normally ask for
Wide Mouth Tubs are usually selected by fill volume, neck opening and the way the product settles in the container. Some packers need a shallow tub for spreads or topical products, while others need a deeper format for tablets, powders or thicker food items. The right match depends on how the product is filled, how it is opened in use and how it is presented on shelf.
Options can include matching lids, tamper evidence features and a choice of pack sizes for line planning. For higher volume packing, the tub shape must work with the case pack and pallet pattern too, because even a strong tub can waste space if the outer carton count is poorly matched. That is usually sorted during pack size planning and trial runs, especially where export cartons or local retail cases are involved.
- Small, medium and larger volume options
- Lids for snap fit or tamper evident use
- Pack size planning for cartons and sleeves
- Colour matching guidance for product ranges
Where this tub suits the product range
This style suits thicker products that need room at the top for scooping or filling without spilling over the rim. It is often used for peanut butter, spreads, confectionery, powdered food mixes, medicated creams, balms, bath products and sample packs with wider content surfaces. The broad opening is useful where the end user will open and close the tub many times over the life of the pack.
In pharma and cosmetic packing, the lid closure and tamper seal detail are often just as important as the body shape. A clean fit supports shelf presentation and helps the pack stay tidy in transit, especially in Durban humidity or during transport between Gauteng and the coast. For food use, product contact surfaces need to be matched to the correct material choice and the filling process must stay consistent from trial to stock run.
- Food packers working with thicker fillings
- Pharmaceutical products that need repeat opening
- Cosmetic creams, balms and body care items
- Retail packs that need neat shelf presentation
Fitting details on the packing line
Most Wide Mouth Tub jobs are planned around the packing line rather than the tub alone. That includes filler size, lid application, tamper seal method and how the filled tubs move into secondary packing. If a line uses manual closing, the lid rim and tub lip must align cleanly. If a line uses a capping head or sealing station, the tolerances need to suit the equipment and the product flow.
Plastic Factory works with packers on line fit checks, mould development and trial production runs so the tub suits the actual packing conditions. This is useful where the product is warm during filling, where the packer uses a semi-automatic closing unit, or where the case pack has to run smoothly into dispatch. Good fitting avoids crushed lids, messy rims and awkward stacking on pallets.
- Line fit checks for manual and machine closing
- Trial runs for new products or changed fills
- Advice on tamper seal placement
- Secondary packing support for retail or wholesale cartons
Material choices for food, pharma and cosmetic use
Polypropylene is often selected when a packer wants a light container with good rigidity and a clean finish. HDPE is widely used too, especially where impact resistance and a slightly different feel are preferred. The final choice depends on the product, the fill temperature, the storage pattern and the look required on shelf. Both materials are suitable for established packaging applications and can be matched to a lid style that keeps the pack neat in transit.
For food-safe applications, material selection needs to be aligned with the product and the packing conditions. A smooth interior helps with emptying and cleaning between runs, while a consistent moulded finish supports repeat filling. Colour can be used for product separation, size coding or range identity, and in many cases the lid and body are specified as a matched set for easier stock control.
- Polypropylene options for light, tidy presentation
- HDPE options for practical handling and impact resistance
- Food-safe material selection for suitable applications
- Colour matching guidance for product families
Care, storage and ordering details that matter
Wide Mouth Tubs should be stored clean, dry and away from rough handling that can mark the rim or distort the lid fit. In warehouses close to the coast, moisture and salt air can affect outer packaging, so cartons and wrapped stock need proper storage conditions even when the tubs themselves are stable. During transport, the tubs should be packed so the rims do not oval out and the lids stay flat in the carton.
When ordering, it helps to confirm the fill volume, product type, lid style, tamper seal requirement, colour, carton count and whether the pack is for food, pharma or cosmetic use. If you need a custom shape or a change to an existing tub, our team in Alrode can work through custom tub design, lid development, mould development, stock run planning and ongoing product updates. Enquiries come through the contact form on our contact page and are handled from there for Johannesburg, Durban, Cape Town, Pretoria, Port Elizabeth, Alberton, Germiston and Boksburg deliveries.
- Confirm fill volume and opening size
- Specify lid type and tamper evidence needs
- State the product category and filling method
- Confirm colour, carton count and delivery area
Key facts
| Material | Injection-moulded polypropylene or HDPE |
|---|---|
| Style | Wide mouth tub with matching lid options |
| Use | Food, pharmaceutical and cosmetic packing |
| Closure | Snap fit lid or tamper evident lid options |
| Typical pack sizes | Selected to suit fill volume and case pack |
| Supply area | South Africa, with delivery to major centres and regional routes |
